Orthopedic devices for penis enlargement have been used by men for more than a decade and have proven themselves positively. The most widely used device is called an extender, which is translated from English as an expander or filler. This fully reflects its purpose. It is characterized by simplicity of design and installation, which allows men to use both purchased (factory) and homemade extenders. It is quite easy to make. The main thing is to have the necessary materials and basic knowledge of the mechanics of intimate tools.
Types and effects of extenders
The device works based on the principle of cavernous body proliferation. This occurs under conditions of constant tissue tension due to the periodic release of the axis in the direction of increased length. The growth of new tissue does not stop; cells divide under the influence of constant disturbance forces.
The average growth rate, according to reviews from users and manufacturers, is an increase in length of 2-5 centimeters in 6 to 10 months. You should not expect immediate results. It will require patience and regular use of the extender. Violation of this recommendation will result in failure to achieve the desired effect.
Depending on the attachment method, extenders are divided into several types. When planning to install the home version, you need to understand how they differ from each other.
Vacuum extension
The spiral is carried out using a special vacuum chamber. It covers the head of the penis with a circumference of about 3-7 centimeters. It is considered the most reliable and safe. The risk of injury can be reduced to zero, as there is no risk of compression.
Extender for penis enlargement
Extension loops and straps
The fastening mechanics are almost the same, but the shape of the fastening is different. In the first case, a loop is used, and in the second case, a rope is used. The difference gives this species a significant difference.
The strap is lined with gauze, so the level of compression is minimal. A loop, on the other hand, can compress the head strongly, interrupting the blood supply to the reproductive organs, but remains the most common option.
How to make an extender with your own hands at home?
You can make any of the three types of apparatus listed. The most difficult to produce is a vacuum due to the fact that you have to create space. Otherwise, the process will not have any significant difference.
Painting
Make your own schematic diagram of the device. To make a drawing, it is enough to study the design of any famous manufacturer. Based on pictures, drawings, videos, they draw their sketches. The length of the side posts is chosen based on the desired result. It can vary from 20 to 25 centimeters.
Materials and tools needed
Homemade extenders at home are assembled from the same parts as the factory. Specific materials depend on the type of structure being installed:
- Stop rings, straps and loops are in direct contact with the skin and should not cause allergic reactions. This imposes certain requirements on the material. Rings can be made of thick cardboard, plastic/hypoallergenic plastic without sharp edges. Its inner diameter should be 2-3 mm larger than the cross-sectional width of the penis. It is best to use a sterile bandage before use, which is changed every time.
- Blades (side rods) are selected so that they can set the required length for a long time. This can be dies, rods, chrome spokes.
- The vacuum chamber and bulb must be sealed. If these conditions are not met, then such a homemade product will not work.
The difference between the devices lies in the fastening elements. If you decide to make variations with the camera, you should give preference not to plastic bottles as written in some sources, but to buy special jars. This is sold in pharmacies. This ensures the creation of an internal vacuum.
Homemade extender scheme
Step-by-step installation instructions
Producing a strap or loop device involves performing the following work sequence:
- A piece with a diameter of 11 cm is cut from a piece of plywood or other material with a thickness of no more than 10 mm. A hole with a circumference of at least 5. 5 cm inside. Other dimensions are determined by the cross-section of the penis.
- The length of the stem is 20-30 cm. They are completely screwed into the plywood, leaving a little on top. The entrance is filled with glue.
- They screw up a "goat" on each one.
- Strips are cut from a thin metal plate and holes are made in it.
- A clamp made of a soft tube or rope, which can be used as a wide medical tourniquet, is inserted into the hole.
- Check the reliability of the setting.
The assembly of the vacuum variety differs only in that the jar with the pear is attached to the end. Not everyone has such a device at home, but it is sold freely in city pharmacies. Radius ranges from 13 to 25 mm. It is selected according to the size of the reproductive organs. Clamp tension is ensured by a rubber sleeve. The length must be at least 6 cm. It can be made from elastic surgical gloves.
The air will be pumped out thanks to the bulb or the connector with the hose. You can use tonometer elements. The shut-off valve is opened from it and inserted from the other end. This allows you to change the operating principle. The pear will start pumping out instead of pumping in air. As you can see, you have to play around more than with a string and loop device.
To help you understand the principle of installing connectors with your own hands at home, a video will help, which clearly shows how the elements are connected, as well as the material from which they are made.
Extender for penis enlargement - tied below the knee
How and when to use?
The indication for using the device is the small size of the device (10-12 cm). This length is not a "reference" length. A man decides for himself whether he is satisfied with his reproductive organs or whether he wants to have more. To increase the size of the penis, you need to wear a homemade or factory-made device for at least 4-6 hours a day. The design allows you to hide the extender under clothing. People around you will not notice anything.
Instructions for using the stretcher:
- The circle is placed on the slightly erect penis. The ring should fit the pubic bone.
- The foreskin is retracted and a camera, loop or strap is attached to the glans. It is necessary to ensure that blood flow is not disturbed (no excessive pressure, changes in the shade of the integument).
- Adjust the rod length. There should be no painful sensation. The parameters gradually increase, allowing the organ to get used to the level of tension, that is, the penis is trained.
If possible, massage the penis every hour. This allows him to quickly adapt to the load. After the allotted amount of time, the device is removed and the meat is kneaded using a special intimate cream. Devices are thoroughly disinfected each time and placed in clean packaging for storage.
Advantages and disadvantages of self-made structures
The advantages of a home stretcher include the following parameters:
- the opportunity to try the stretcher without buying the device;
- relatively cheap;
- get a design that fully matches the parameters of the phallus.
There are actually very few advantages. There are more cons. This includes the inconvenience of the product, because it is quite difficult to independently assemble a model that will ideally rotate, wear, remove, and not press anywhere and not slip.
Which extension is better - factory or homemade?
To answer this question, it is enough to compare two types of models:
- Homemade products are heavier than factory models. This leads to the need to adjust the rod every time for a long time so that they do not compress the head of the penis. Another thing is that it is quite difficult to make a vacuum model. In this way, it is usually less effective than homemade with loops and ropes.
- Costs, referred to as advantages, are relative advantages. Today there are Chinese models, costing 1-3 thousand rubles. This is no more expensive than a homemade extender. No one will sell half a meter of hairpins or 20 centimeters of textolite. You need to buy more materials that will be idle. This makes installing the device with your own hands profitable only when you already have everything you need.
- The simple design of the self-assembled device is not an advantage, but a disadvantage, as it will be inconvenient to use. You have to spend a lot of time putting on and taking off, and taking into account the fact that self-massage is recommended periodically, it is also less effective.
One conclusion can be drawn - factory devices are better. To try this method of penis enlargement, you can only buy cheap models
What are the possible risks when using a homemade device?
Specialists and experts do not recommend installing the extender yourself without the appropriate skills. If the device turns out to be "clumsy", pressing, pressing, causing discomfort, wearing it is strongly not recommended. This can lead to unpleasant consequences.
Homemade extension
A properly installed device will not have lower efficiency than the factory device. It will just be aesthetically unattractive. Otherwise, there will be no difference, but there are nuances here too. Many users write that with prolonged use, hematoma, compaction, and irritation form on the dermis.
This may be due to poor quality materials. Finding medical silicone in a pharmacy is almost impossible. If one is sold, the property leaves much to be desired and with prolonged relationships negative consequences begin to appear.